The sealless Drum pump F/FP 424 is ideal for transferring various low-viscosity and aggressive media. It is suitable for media that flows quickly and neither bond, crystallizes, or is abrasive. This pump can empty drums, IBCs and basins. The specific construction with a spiral-shaped guide bearing in the inner tube prevents unwanted deposits in the pump and increases the service life significantly. The pump is available in stainless steel, polypropylene or polyvinylidene fluoride. The F/FP 424 in stainless steel can also be used in hazardous areas.
F 424 / FP 424
Drum pump sealless
- No seal in the liquid area
- Optimal emptying of the inner tube
- Suited for hydrochloric acid and chromic acid
- Available in High Temperature (HT) version up to 60°C (140°F)
- Long spiral-shaped guide bearing
Industries Served
Outer tube polypropylene:
Hydrochloric acid, boric acid, sulfuric acid, citric acid, lactic acid, phthalic acid, sodium hydroxide, potassium hydroxide, ammonia water
Outer tube material polyvinylidene fluoride:
Hydrobromic acid, chromic acid, chloric acid, hydrofluoric acid (hydrofluoric acid), battery acid, nitric acid, nitrous acid, sulfuric acid, acetic acid to 80 %, methyl sulfuric acid, perchloric acid, peracetic acid, phosphoric acid, potassium (Javelle water), sodium hypochlorite (sodium hypochlorite), sodium chloride (table salt), potassium chloride, sodium sulfate, sodium carbonate
Outer tube material stainless steel:
Petroleum, diesel, heating oil, hydraulic oil, engine oil, engine oil, gasoline, formic acid (85 %), ethyl glycol, petroleum, “MEK (methyl ethyl ketone = butanone), octane, ethanol, methanol, butanol, acetan, toluene, isobutanol, propanol, xylene, urea solutions, white spirit, diesel
Dimensional Drawing F424-PP-41_with-flange_0808.pdf
Dimensional Drawing F424-S-43_with-flange_066.pdf
Dimensional Drawing F424-S-50_with-flange_076.pdf
Dimensional Drawing F 424 PP-41_0808.pdf
Dimensional Drawing F 424 PP-50_066.pdf
Dimensional Drawing F 424 S-43_066.pdf
Dimensional Drawing F 424 S-50_066.pdf
Dimensional Drawing FP424-Ex-S_43-38+43_37Z_with-flange_1112.pdf
Dimensional Drawing FP424-Ex-S_50-45Z_0413.pdf
Dimensional Drawing FP424-Ex-S_50-45Z_with-flange_0413.pdf
• Flow rate: max. 240 l/min1
• Delivery head: max. 30 mwc2
• Viscosity: min. 1 mPas – max. 1200 mPas2
• Outer tube diameter: min. 40 mm3 – max. 50 mm3
• Immersion length: 700, 1000, 1200
• Materials outer tube: Polypropylene, Polyvinylidene fluoride, Stainless steel
• Media / Fluids: Acids, Aggressive media, Alkalis, Aqueous salt solutions, Fuels, Highly flammable media, Petroleum products, Solvents
• Seal: sealless
• Container: 1000 l IBC, 200 l drums, small containers, Hobbocks
